ELEGOO Mercury XS Bundle Wash & Cure Machine

[360° all-round exposure] The post-curing station adopts 2 L-shape light bars (each built-in 14 UV LED lights) and adds 4 UV LED beads beneath the turntable. Work with 360°auto-rotating turntable and a handheld UV lamp that cures the nooks and crannies and interior of 3D prints, so that the entire model is cured thoroughly without dead ends.

[Large washing volume] With an 7000ml large capacity sealed water tank, you can directly wash large models printed by ELEGOO Saturn and Mars 3, or clean parts in batches, which offers substantial time savings and improves your productivity.

[Easy and intuitive operation] With a single knob, just press and hold to turn on the machine, then rotate the knob to set an appropriate time for washing or curing, and your models will be ready in a short time. The UV cover can block 99.9% of ultraviolet rays and protect your eyesight during post-curing.

[Wide Compatibility] Directly compatible with ELEGOO Saturn or Mars 3 3D printers and the most similar build volume LCD/DLP/SLA 3D resin printers on the market, making your 3D resin print post-processing simple, professional, and efficient.

Operation Instructions:

After the model is printed, please clean and blow-dry the model before putting it into the machine.

If the model become yellow after curing, please reduce the curing time. Over curing will lead to a yellowish model.

Recommended ambient temperature is 0-40 degrees, and the ambient humidity temperature is 20%-50%.

Please do not use it for more than 40 minutes at a time to avoid overheating

Cure Time: If model diameter less than 30 mm, the curing time is recommended to be 2 minutes. If the surface structure of the model is complex, it is recommended to increase the curing time properly.

Special Notes: The washing function is not quite suitable for 3D models printed with water washable resin, which is better to be washed with running water.