Immersive Audio Re-Invented
With the explosion of spatial audio, studios of all sizes need to implement multichannel monitoring, from 7.1.4 and beyond. iLoud MTMs are the ideal immersive audio reference system, packed with features to take your Atmos[reg] mixes to the next level.
iLoud MTM has a deep low-frequency extension for its size. Being a compact speaker, using its lowest cutoff point requires reducing the maximum SPL. In immersive setups where that lower cutoff isnt needed and speakers are at a greater distance from the mixing position, this isnt ideal.
Proper bass management can help by letting the main and surround speakers focus on the frequency range they do best and letting the subwoofers handle the low-frequency range. Adding a standard 80 Hz (LFE) setting to MTM allows for quick integration with subwoofers at the frequency and slope that are considered the standard when doing bass management in multichannel or immersive setups.
Features
* Built-in acoustic correction tunes to any placement
* Point-source performance regardless of distance
* Controlled dispersion reduces acoustic issues
* Included in Dolby DARDT (Dolby Audio Room Design Tool) for precise installation
* Integrated LFE bass management
* Compact design that's easy to mount anywhere
Specifications
Type: 2-Way/3-speakers bi-amped, digitally controlled studio monitor
LF Drivers: 2 x 3.5" polypropylene custom made mid-woofers
HF Driver: 1" low distortion, back chambered silk dome tweeter
Acoustic Design: DSP tuned bass reflex
Number of amps per speaker: 2
Amplifiers type: High efficiency Class-D
Total power: 100W RMS
LF power: 70W RMS
HF power: 30W RMS
Crossover Type: Linear Phase Variable Order
Crossover Frequency: 3.1kHz
Frequency response: from 50 Hz to 24 kHz +/- 2dB (40 Hz -6dB when uncal, -3 dB when cal)
Phase response: System remains coherent within +/- 15[degree] from 200Hz to 20kHz
Sensitivity at +4dBu: 0dBu signal generates a 100 dB SPL @ 1 m
Sensitivity at -10dBV: -11dBu signal generates a 100 dB SPL @ 1 m
Maximum SPL @ 1m, one speaker playing, on axis: 103dB from 200Hz up sine wave, 95dB at 100Hz sine, 93dB pink noise
Placement setup: Manual switches for LF Extension, LF trim, HF trim, Desk position
LF extension switch: Sets -3dB point of the frequency response at 40, 50, 60 or 80 Hz (LFE)
LF switch: Low shelf, +2dB or -3dB from 100Hz down
HF switch: high shelf, +2dB or -2dB from 8kHz up
Desk switch: -4dB at 160Hz and +1dB at 1.8kHz
Calibration: Fully automatic and built-in digital calibration, microphone included
Measurement Microphone: Omnidirectional, Mems based precision measurement microphone
Full DSP control
Connectors: 1x combo XLR-1/4" TRS balanced input; 1/8" TS ARC microphone input, 1 x USB type-B (service use only), AC POWER socket
Power requirement: 90 to 240 V AC, auto-ranging, 50 or 60Hz, 120W max power consumption
Includes
- 11 x iLoud MTM monitor
- Power cord
- ARC Microphone
- ARC Microphone clamp
- ARC Microphone cable
- Tilting stand
- Horizontal support feet
- Locking key
