MARTIN Direct Vent Propane Heater - Indoor Wall Furnace with Thermostat, 20000 BTU

Specs:

MDV8P (8000 BTU):

Gas Type: Propane

Heating Capacity: 18 m2 (194 ft2)

Height x Length x Depth: 57.5 x 30 x 18 cm (22 5/8 x 11 13/16 x 7 1/8 in)

Weight: 10.5 kg (23.1 lb)

Maximum Input: 8000 BTU/hr

Minimum Input: 2900 BTU/hr

Thermal Output: 6400 BTU/hr

Manifold Pressure: 10.8" W.C.

MDV12P (11000 BTU):

Gas Type: Propane

Heating Capacity: 30 m2 (323 ft2)

Height x Length x Depth: 57.5 x 38 x 18 cm (22 5/8 x 15 x 7 1/8 in)

Weight: 11.5 kg (25.3 lb)

Maximum Input: 11000 BTU/hr

Minimum Input: 3600 BTU/hr

Thermal Output: 8800 BTU/hr

Manifold Pressure: 10.8" W.C.

MDV20P (20000 BTU):

Gas Type: Propane

Heating Capacity: 50 m2 (538 ft2)

Height x Length x Depth: 57.5 x 66 x 21 cm (22 5/8 x 26 x 8 1/4 in)

Weight: 21.5 kg (47.4 lb)

Maximum Input: 20000 BTU/hr

Minimum Input: 6000 BTU/hr

Thermal Output: 16000 BTU/hr

Manifold Pressure: 10.5" W.C.

Clearances to combustible surfaces:

Rear:

- MDV8: 2 cm (0.787 in)

- MDV12/20: 3 cm (1.18 in)

Sides: 15 cm (6 in)

Above: 61 cm (24 in)

From floor: 18 cm (7 in)

Installation kit included.

Important:

• This appliance must be installed by a licensed, authorized service technician or contractor.

• A qualified gas appliance installer must connect the heater to the gas supply. Consult all local codes.

• The installation must be done in accordance with the installation instructions provided with the product and all local and national building and fire codes.

• This appliance is only for use with propane gas. This appliance is not convertible for use with other gases.

• The service technician and user must read and follow all instructions provided in the Owner's Installation, Safety and Operations Manual.

• The thickness of the wall cannot be less than 4-1/2" (11.5 cm), nor can it exceed 12-5/8" (32 cm).

Certified for use in Canada and USA

Conforms to ANSI STD Z21.86-2008

Certified to CSA STD 2.32-2008 (R2014), and CGA 2.17-M91 (R2009)