Rockford Fosgate T600-4 Power 600 Watt 4-Channel Amplifier

The T600-4 amplifier offers the perfect balance of power output and compact design required for high performance audio systems. The 4-channel configuration allows fine tuning adjustments between front stage component systems and rear surround speakers. The built-in crossover also allows the rear channels to be configured for running one or two subwoofers. 24dB/octave crossover 2/4 channel input switch MOSFET power supply MOSFET output stage 4 Gauge power/ground connectors Audiophile grade speaker connections RCA pass-thru outputs.Recommended Fuse (not included)80 A Channel Separation60 dB Damping Factor>200 Common Mode Rejection>60 dB Signal-to-Noise (CEA)>90 dB Max. Current Draw (13.8V Sinewave)80 A Average Current Draw (13.8V Music)40 A Total Harmonic Distortion (THD+Noise)4-Ohm: <1.0% 2-Ohm: <1.0% Shipping Weight12.00 Lbs. (5.44 Kg.) Operating Voltage9 - 16 VDC CEA-2006 CompliantCEA-2006 Guidelines CEA-2006 Power Rating 100W x 4 @ 4Ω ≤1.0% THD+N Suggested Alternator75 A Efficiency (average)70% @ 4-Ohm 64% @ 2-Ohm Input Sensitivity150 mV to 4 V Number of Channels4 Rated Power (RMS Continuous Power)100 Watts x 4 @ 4-Ohm 150 Watts x 4 @ 2-Ohm 300 Watts x 2 @ 4-Ohm Bridged 2-Ohm x 2 Bridged Stable Total Power (Sum of Rated Power)600 Watts RMS Dynamic Power (PVC/PowerCube®)Front Channels 139 Watts x 2 @ 4-Ohms 0° Res 236 Watts x 2 @ 2-Ohms 0° Res Rear Channels 140 Watts x 2 @ 4-Ohms 0° Res 236 Watts x 2 @ 2-Ohms 0° Res BridgeableYes Crossover ControlsFront High-Pass (HP): 50-500Hz 24dB/octave Butterworth Front Low-Pass (LP): 50-500Hz 24dB/octave Butterworth Rear High-Pass (HP): 50-500Hz 24dB/octave Butterworth Rear Low-Pass (LP): 50-500Hz 24dB/octave Butterworth Tone ControlsFront Channels - Punch EQ Treble: 0dB to +12dB @ 12kHz Bass: 0dB to +18dB @ 45Hz Rear Channels - Punch EQ Treble: 0dB to +12dB @ 12kHz Bass: 0dB to +18dB @ 45Hz Signal InputFront Low level: 1 RCA pair Rear Low level: 1 RCA pair Signal OutputLow Level: 1 RCA pair Power Input ConnectorBlock Power Wire Gauge4 AWG Speaker Output ConnectorScrew terminal barrier strip Speaker Wire Gauge8 AWG to 18 AWG Heat Sink TypeCast aluminum CoolingConvection Remote ControlsOptional Remote Punch EQ (overrides rear channel built-in Punch EQ) Visual IndicatorsPower Thermal Protect Circuit Topology ClassClass A/B Frequency Response20Hz to 20kHz +/- 1dB Dimensions (H x W x D)2.14 x 8.14 x 14.91 (in) 5.42 x 20.68 x 37.86 (cm)