AT A GLANCE
·Load Capacity: 22 lb
·
·Maximum Height: 55.1"
·
·Minimum Height: 10.2"
·
·Folded Length: 14.6"
·
·Leg Sections: 5
·
·Weight: 2.2 lb
·
·8x Carbon Fiber Legs
·
·180° Reverse-Folding Legs
·
·Detachable Monopod Leg
·
·Y-11 Ball Head
· DESCRIPTIONThe A1205 Carbon Fiber Tripod with Y-11 Ball Head from Sirui is a 5-section tripod that weighs 2.2 lb. The 8x carbon fiber legs fold a full 180° in reverse to make it a compact 14.6". With the center column fully extended, the tripod can reach a maximum working height of 55.1". Additionally, with a load capacity of 22 lb, this tripod is suitable for a pro DSLR with a large telephoto lens.The hook at the bottom of the center column enables you to hang a small sandbag or camera bag to stabilize the tripod. Plus, variable leg-angles allow the tripod to have a minimum height of 10.2", and the center column is also reversible to let you get even closer to the ground. Sometimes a tripod is not allowed in certain areas because space is limited. That is when a useful feature comes into play–the tripod's leg detaches and converts into a monopod. You can increase the height of this monopod by attaching the center column to it.The included Y-11 Ball Head is Arca-type compatible and comes equipped with a quick release plate. It also has a knob-style lock for the clamp, and two separate knobs control the movement of the ball and 360° panning base. In addition, with the ball head's single-cut notch, the camera can be placed in a 90° angle.
·The 2.2 lb tripod has a maximum height of 55.1", a minimum height of 10.2", and a load capacity of 22 lb
·
·The 8x carbon fiber legs have 5-sections and the legs fold in reverse to a compact 14.6"
·
·Weight and stability can be increased on the support by adding a small sand bag or camera bag to the hook located at the bottom of the center column
·
·The tripod's detachable leg converts into a monopod and the height is increase when the leg is attached to the center column
·
·The Y-11 Ball Head has separate knobs for the pan and tilt, and a single cut notch for a 90° angle position of the camera
· SPECIFICATIONSHead Type Ball Head
Quick Release Plate Type Arca-Type
Load Capacity 22 lb / 10 kg
Maximum Working Height 55.1" / 140 cm
Max Height without Center Column 42.7" / 108.5 cm
Minimum Working Height 10.2" / 25.9 cm
Folded Length 14.6" / 37.1 cm
Materials Carbon Fiber
Weight 2.2 lb / 1.0 kg
Leg Lock Type Twist Lock
Independent Leg Spread Yes
Leg Sections 5
Bubble Level No
Center Column Sections 1
Center Column Extension Type Rapid
Lateral / 90-Degree Center Column No
Package Weight 4.05 lb
Box Dimensions (LxWxH) 16.1 x 4.8 x 4.4"
