THINKWARE Hardwiring Cable for Thinkware F790 Dash Cam | Parking Mode | Impact and Motion Detection | Car Voltage Drain Protection System | Alternative Power Supply from Fuse Box

THINKWARE TWA-PLUGSH Hardwiring Cable is designed to connect your THINKWARE F790 dash cam directly to your vehicle's fuse panel, which allows the camera's parking surveillance mode to function while the vehicle's ignition is turned off. The built-in voltage metre in the main unit will be activated to monitor the battery level. The main unit will automatically shut off if the voltage detected is below the configurable voltage cut-off level. The voltage cut-off level is adjustable from 11.6V to 12.3V and 23.2V to 24.6V on the THINKWARE PC Viewer for Windows and Mac OS. The THINKWARE TWA-PLUGSH Hardwiring Cable is compatible with the THINKWARE F790 Dash Cams only. One-year manufacturer's limited warranty: covers units sold at authorized retailers only. *Disclaimer: Device is pre-loaded with a firmware and GPS data that are specific for use within Canada only. Proper device operation cannot be guaranteed outside of Canada.

Connects the main F790 dash cam unit to the vehicle’s fuse panel (Professional Installation Recommended)

Enables Parking Surveillance mode with impact and motion detection when the car is parked

Activates the built-in voltage metre in the main unit, which monitors the battery level and automatically shuts off the device if the voltage detected is below the configurable cut-off level

Connecting cable is 9.8 feet (2.98 metres) long

Compatible with the THINKWARE F790 Dash Cam only